Go-To-Market Blog | Quantum Business Solutions

ConnectAndSell, ZoomInfo and HubSpot Calling Stack Guide

Written by Shawn Peterson | Nov 22, 2026, 4:31:16 PM

TL;DR: Quick Answer

ZoomInfo finds the right people and their direct dials, HubSpot holds the records and decides who gets called, and ConnectAndSell turns a HubSpot list into live conversations. Every call outcome then writes back to HubSpot, where workflows run the follow-up.

  • Route everything through HubSpot: ZoomInfo exports into HubSpot, and ConnectAndSell dials HubSpot lists.
  • Map ZoomInfo direct dials and mobiles to the HubSpot phone properties ConnectAndSell dials first.
  • Build your call outcomes in HubSpot before launch, because ConnectAndSell uses them as its dispositions.

This guide is for sales leaders and RevOps teams who own, or are about to buy, ConnectAndSell and want it to run on ZoomInfo data inside HubSpot. You will get the data flow, the list rules, the call outcome setup, the follow-up workflows and the numbers to watch, so your live conversations turn into tracked meetings instead of notes nobody reads.

Table of Contents

  1. How do ConnectAndSell, ZoomInfo and HubSpot fit together?
  2. What data moves between the three tools?
  3. How should you build call lists for live conversation calling?
  4. Call outcomes and properties to set up in HubSpot
  5. Follow-up workflows that fire on outcomes
  6. Which metrics show the stack is working?
  7. Mistakes that waste conversations
  8. Frequently Asked Questions

How do ConnectAndSell, ZoomInfo and HubSpot fit together?

Each tool does one job, and HubSpot sits in the middle. ZoomInfo supplies targets and phone numbers, HubSpot stores them and decides who is eligible to call, and ConnectAndSell delivers the conversations and logs the result back to HubSpot.

ToolIts job in the stackWhat it should not do
ZoomInfoFind accounts and people that fit, with direct dials and mobiles, and export them to HubSpotAct as the call list. Lists built only in ZoomInfo skip your ownership and suppression rules.
HubSpotHold every contact, owner, lifecycle stage and call outcome. Build the call lists. Run follow-up.Hold unreviewed bulk data. Clean it on the way in, not after it has been dialed.
ConnectAndSellDial the HubSpot list and connect reps to live people, then log attempts, conversations and outcomesDecide who to call. If the list is wrong, faster dialing only reaches the wrong people sooner.

ConnectAndSell is not a dialer your reps drive. Its HubSpot Marketplace listing says it uses trained human agents and AI to deliver live conversations with your targets, and that any HubSpot list can be imported and called. That is why list quality decides the outcome. If you are comparing it with other options, our parallel dialer comparison covers the differences, and the wider integration picture is in our ZoomInfo HubSpot integration guide.

What data moves between the three tools?

Data moves in one loop: ZoomInfo to HubSpot, HubSpot to ConnectAndSell, and outcomes back to HubSpot. You do not need a direct ZoomInfo to ConnectAndSell connection for this to work, because HubSpot is the system of record for both.

  1. ZoomInfo to HubSpot. Reps or admins export contacts and companies through the HubSpot connector in ZoomInfo's Admin Portal. This is separate from the ZoomInfo Inbound Enrich app on the HubSpot Marketplace, which enriches records created in HubSpot. For calling, the export path is the one that matters.
  2. HubSpot to ConnectAndSell. An admin logs in to ConnectAndSell with HubSpot, maps phone fields and contact properties, and selects HubSpot lists to turn into call lists.
  3. ConnectAndSell to HubSpot. According to ConnectAndSell's HubSpot configuration guide, attempts and conversations are written to HubSpot as completed call activity with call outcomes, notes land on the contact, and follow-up tasks can be created for outcomes that need another call.
Data pointSourceHubSpot propertyWhy it matters for calling
Direct dialZoomInfo exportPhone numberConnectAndSell maps Phone and Mobile phone by default
Mobile numberZoomInfo exportMobile phone numberSecond number to try for the same person
Company phoneZoomInfo exportA third phone property, or Phone as second choiceLast resort. It reaches a switchboard, not the person.
OwnerZoomInfo user mapping or HubSpot rulesContact ownerDecides whose list the contact joins and who gets the follow-up
Call outcome and notesConnectAndSellCall activity on the contactTriggers the next step and feeds reporting
Fields reps update on the callConnectAndSellContact properties you mark as updatableCaptures facts like current provider or renewal timing

Two ZoomInfo settings shape this. First, the export mapping lets you stack fields into one HubSpot property in priority order, for example Direct Phone first and Company Phone second, and choose "Complete if missing" or "Overwrite field" for each. Second, ZoomInfo checks for duplicate contacts by email, then by first name, last name and exact company name, and for duplicate companies by domain. Our ZoomInfo to HubSpot field mapping template and our guide to exporting ZoomInfo contacts without duplicates cover both in full.

Key Insight: ZoomInfo's own guide notes that exported contacts are not automatically associated with companies in HubSpot. Turn on HubSpot's setting that creates and associates companies from contact email domains, or your call lists cannot filter on company fields like industry or ICP tier.

How should you build call lists for live conversation calling?

Build the list in HubSpot as an active segment (HubSpot's new name for lists) with eligibility rules, and use ZoomInfo only to fill it. A conversation is the expensive part of this stack, so every name on the list should be someone you are allowed and happy to talk to today.

In ZoomInfo Advanced Search, before you export:

  • Use the Contact Info filter to require a direct dial or mobile number.
  • Set Management Level and Departments & Job Functions to the roles that buy, not everyone at the company.
  • Turn on Exclude org exported contacts so two reps do not export the same people.
  • With the HubSpot import enabled, use the HubSpot filters to exclude companies another rep owns and companies with associated deals.

In HubSpot, ConnectAndSell's own setup guide recommends a template active segment that includes Lifecycle stage of Lead or Marketing Qualified Lead and excludes every Lead status except New, Open and Attempted to contact, with empty Lead status included. We add four rules on top:

  1. The contact has an owner, and the owner is the rep who will run the session.
  2. The associated company has an ICP tier set, so Tier 1 accounts can be called first.
  3. The contact is not marked as a do-not-call or wrong number from a past session.
  4. The segment holds roughly one session's worth of contacts per rep, so the list stays fresh and is rebuilt each week.

How you set the ICP tier is covered in our page on building your ICP and TAM in HubSpot with ZoomInfo data.

Is your HubSpot ready to feed a calling program?

We will look at your segments, phone fields and call outcomes and tell you what would stop a live conversation program from working. Book a free 30-minute fit check.

Call outcomes and properties to set up in HubSpot

Set up your call outcomes in HubSpot first, because ConnectAndSell reads HubSpot's call outcomes and uses them as its call dispositions. Custom call outcomes need Sales Hub or Service Hub Professional or Enterprise. HubSpot allows up to 30 of them, and an outcome cannot be edited after it is saved, so agree on the names before anyone types them in.

Call outcomeDisposition type in ConnectAndSellNext step in HubSpot
Meeting bookedPositiveLead status to Connected or a custom value, owner notified, meeting confirmed
Interested, send infoPositive, follow upFollow-up email or sequence, call task in 3 business days
Call back laterFollow upCall task on the date the prospect gave
Referred to someone elsePositiveNew contact created and associated, call task for the referral
Not interested nowNeutralLead status to a "bad timing" value, out of call lists for a set period
Not a fitNegativeLead status to Unqualified, out of all call lists
Wrong number or left companyNegativeData issue flag for re-research in ZoomInfo

ConnectAndSell also lets you mark the Follow Up box on outcomes that need another call, and map attempt dispositions to a HubSpot outcome such as No answer. Then add the contact properties reps should see and update during the conversation. Its guide shows each mapped property with an "Updatable" option that saves the rep's edit back to HubSpot. Good candidates are the facts you can only learn by talking: current provider, contract or renewal timing, decision process, and the next step agreed.

Follow-up workflows that fire on outcomes

HubSpot can use custom call outcomes as filters in workflows and segments, which is what turns a disposition into an action. Build one workflow per outcome group and keep each one small.

  1. Meeting booked. Enroll contacts whose latest call outcome is Meeting booked. Set Lead status, notify the owner, and create a deal at your first stage if that is how your team counts pipeline.
  2. Send info. Enroll the contact in a follow-up sequence. On Sales Hub Enterprise a workflow can do this. On Professional, the rep enrolls from the task.
  3. Not interested now. Set a re-engage date property 90 days out and remove the contact from call segments until then.
  4. Wrong number or left company. Add the contact to a data-issues segment that an admin works weekly in ZoomInfo, either finding the new number or the replacement person.
  5. No conversation after several sessions. Move the contact to email-only. Our post on how many call attempts to make before you stop covers where to draw that line.

Reps should still own the daily routine around these workflows. Our daily ZoomInfo and HubSpot workflow for sales reps shows where call sessions fit in a rep's day.

Which metrics show the stack is working?

Measure each handoff, not just total dials. If meetings are low, these numbers tell you whether the problem is the data, the list, the message or the follow-up.

MetricWhere to see itWhat a problem looks like
Contacts with a direct dial or mobileHubSpot segment countsLists padded with company switchboard numbers
Conversations per session hourConnectAndSell reportingLow counts point to phone data quality
Wrong number and left-company rateHubSpot call outcome reportA rising share means stale exports
Conversation to meeting rateHubSpot call outcome reportGood connect volume but few meetings points to targeting or message
Meetings held and deals createdHubSpot meetings and deals reportsMeetings booked but not held points to the confirmation workflow

For industry context on connect rates, see our look at cold calling answer rates in 2026. To tie the program to ZoomInfo spend, use the reporting in how to measure ZoomInfo ROI in HubSpot.

Mistakes that waste conversations

  • Dialing ZoomInfo exports before they are owned. Unowned contacts produce meetings nobody follows up.
  • Accepting HubSpot's default call outcomes. They describe the call, not the next step. Add outcomes that each lead to one action.
  • Company phone in the Phone property. If the switchboard sits where the direct dial should be, reps spend sessions talking to receptionists.
  • No suppression after a "not interested". Calling the same person again next week burns the account.
  • Building lists in two places. When reps build lists in ZoomInfo and admins build them in HubSpot, the rules drift. Keep the final list in HubSpot.

Quantum runs this exact stack for clients as Sales Blitz as a Service, and we set up the ConnectAndSell and HubSpot side through our ConnectAndSell and HubSpot implementation.

Conclusion

A live conversation stack is only as good as the list it dials and the follow-up after the call. Let ZoomInfo find the people and numbers, let HubSpot decide who is eligible and what happens next, and let ConnectAndSell deliver the conversations and write every outcome back.

Set up the call outcomes, phone mapping and segments before the first session, then review outcomes weekly and fix the data the calls expose. For the full program design, our ConnectAndSell definitive guide and ConnectAndSell pricing and setup post go deeper on the calling side.

Want your first calling session set up right?

We will map your ZoomInfo export, HubSpot segments and call outcomes into one plan your reps can run next week. Book a free 30-minute fit check.

Frequently Asked Questions

Does ConnectAndSell integrate with HubSpot?

Yes. ConnectAndSell has an app on the HubSpot Marketplace. Admins log in with HubSpot, turn HubSpot lists into call lists, and calls are logged back to the contact with an outcome.

Do I need a direct ZoomInfo to ConnectAndSell integration?

Not for this setup. ZoomInfo exports contacts and phone numbers into HubSpot, and ConnectAndSell dials HubSpot lists, so HubSpot carries the data between them.

Which HubSpot plan do I need for custom call outcomes?

Custom call outcomes need Sales Hub or Service Hub Professional or Enterprise. HubSpot allows up to 30 custom call outcomes, and they cannot be edited after saving.

Which phone numbers does ConnectAndSell dial from HubSpot?

Its HubSpot setup maps the Phone and Mobile phone properties by default, and you can add a third phone property in priority order. Put the ZoomInfo direct dial and mobile number in those properties.

Can a workflow enroll a contact in a sequence after a call?

Yes on Sales Hub or Service Hub Enterprise, where workflows can enroll contacts in sequences. On Professional, reps enroll the contact themselves from the follow-up task.

What should happen when a call reveals bad ZoomInfo data?

Log a wrong number or left company outcome, move the contact to a data-issues segment, and have an admin research a new number or the replacement person in ZoomInfo each week.

Sources & References

Related Reading from Quantum

Ready to put any of this into practice? See how we run ConnectAndSell with HubSpot →

About the Author — Shawn Peterson

CEO · Quantum Business Solutions · HubSpot Platinum Solutions Partner

Shawn has spent 20+ years architecting revenue operations for B2B organizations across office equipment, MSP and IT services. Quantum is a HubSpot Platinum Solutions Partner and a ZoomInfo Diamond partner that builds HubSpot, runs outbound email and calling programs, and helps companies get found in search and AI answers. Connect on LinkedIn →

No call required

Will your HubSpot lists hold up under live conversation calling?

Tell us how you build call lists and log call outcomes today and we will reply with the first three things we would fix. If your setup is ready to dial, we will say that.