How to Connect ZoomInfo to HubSpot: Step-by-Step Setup
TL;DR: Quick Answer
To connect ZoomInfo to HubSpot, a ZoomInfo admin goes to Admin Portal, Integrations, Connections, clicks Connect on the HubSpot tile and signs in with a HubSpot Super Admin. You then set the export preference, user mapping, export settings and field mapping, test, and turn the integration on for users. Enrich is a separate connection under Integrations, Connect Enrich.
- Connect as a dedicated HubSpot Super Admin service user, not a rep or a person who might leave.
- Map every ZoomInfo user to their HubSpot user so exported records get the right owner.
- Run Test Mapping and a handful of real exports before you flip the toggle for everyone.
This is the setup procedure for the admin who will actually click the buttons. Every menu name below comes from ZoomInfo's HubSpot integration guide and HubSpot's knowledge base. Screens can differ by ZoomInfo package and change over time, so where yours look different, trust your Admin Portal and confirm with your ZoomInfo admin contact.
Which ZoomInfo HubSpot connection are you setting up?
There are two, and most confusion starts here. ZoomInfo's technical documentation has one guide for each.
| Connection | Where you set it up | What it does |
|---|---|---|
| HubSpot integration (the connector) | ZoomInfo Admin Portal > Integrations > Connections | Lets users export companies and contacts from ZoomInfo to HubSpot, with field mapping and duplicate checks. Also imports HubSpot data into ZoomInfo for filters and insights. |
| Enrich for HubSpot | ZoomInfo Admin Portal > Integrations > Connect Enrich | Instant Enrich fills new HubSpot records as they are created. Scheduled Enrich refreshes existing records on a schedule. |
ZoomInfo's marketing pages also describe its inbound enrichment app as available on the HubSpot App Marketplace, where the listing is called ZoomInfo Inbound Enrich and requires a ZoomInfo subscription. Whether Enrich is in your contract depends on your package, so check before you plan around it. This page covers the connector first, then Enrich. For what each one is for, start with the ZoomInfo HubSpot integration guide.
What do you need before you connect?
Four things, all from ZoomInfo's guide:
- A ZoomInfo admin with Admin Portal access. The admin who makes the first connection becomes the primary connected admin.
- A HubSpot Super Admin, or an admin user with the permissions below, to sign in during the connection.
- The right HubSpot permissions for users. Under Users & Teams, CRM objects: View, Edit and Delete on Contacts and Companies (ZoomInfo recommends All, minimum is records they own), and View, Edit and Delete on all records for other imported objects. Turn on Marketing Access on the Marketing tab and App Marketplace access under Account, Settings Access.
- A supported HubSpot plan. ZoomInfo lists Free, Basic, Professional and Enterprise as supported.
Do two more things before you click Connect. Create the ZoomInfo Company ID and ZoomInfo Contact ID custom properties, because custom fields must exist before they can be mapped. And clean your company domains and duplicates, because ZoomInfo checks for existing companies by domain. Our HubSpot data cleanup checklist covers the prep in order.
Which HubSpot user should you connect as?
A dedicated HubSpot user with Super Admin rights, used only for integrations. ZoomInfo's default and preferred option is the Service Account connection: every export and HubSpot filtering job runs through that one HubSpot account, and other users never connect their own credentials.
Here is why the choice matters:
- Ownership. When a rep's ZoomInfo email matches their HubSpot user email, new records they export are owned by them. When it does not, the owner becomes the primary connected admin.
- Turnover. If you connect as a person and that person leaves, someone has to change the user before exports break. A service user does not quit.
- Control. Only the primary connected admin can disconnect. Secondary admins can change mapping and settings, and can take over with the Change User option.
The alternative is User Account connections, where every rep connects to HubSpot with their own login. Use it only if your security team requires it, because each rep then needs the HubSpot permissions and their own working connection.
Would you rather have someone else run the setup?
We connect and configure ZoomInfo for HubSpot portals regularly and can do it with your admin on a call. Book a free 30-minute fit check.
Steps 1 to 4: make the connection
- Open the connections page. In ZoomInfo, go to Admin Portal > Integrations > Connections. Use Filters or Search integrations to find HubSpot.
- Click Connect on the HubSpot tile. Sign in with the dedicated HubSpot Super Admin. Those credentials become the Service Account, and your ZoomInfo login is listed as the ZoomInfo Admin.
- Choose the HubSpot account. In the popup, select the portal you want and click Choose Account. If you have a sandbox and production portal, pick production unless you are deliberately testing.
- Open the settings. On the success message, click Edit Settings to reach the General Settings page. If you closed it, go to the Connected tab and use the three-dot menu, then Settings.
On General Settings, confirm the Service Account User is the integration user and the Export Preference is Service Account.
Steps 5 to 8: configure settings and mapping
- Check user mapping. Click Edit User Mapping and match each ZoomInfo user to their HubSpot user. Anyone shown as User not mapped will export records owned by the admin. If you switched from a sandbox, click Reset Mapping so the list reflects the connected portal.
- Set export preferences. On the Export tab, choose which objects users may export, set the maximum records per export (up to 100,000 for companies) and set the Create and Update Rules. We start most portals with company duplicate creation turned off and a low export maximum for the first weeks.
- Configure export mapping. On the Export Mapping tab, review the Companies and Contacts defaults, set the currency, add your ZoomInfo ID fields and choose an Update Option for each row. Keep standard fields on Complete if missing. The full template is in our ZoomInfo to HubSpot field mapping guide.
- Review Import and search filters. The Import tab is on by default and lets ZoomInfo read HubSpot contacts, companies, deals, tasks, users, deal history, products and deal stages, running hourly incremental syncs after an initial backfill. Add Import Rules if you want to exclude irrelevant records. Then decide which HubSpot filters to switch on for Advanced Search, which refresh every 24 hours.
ZoomInfo's guide notes that HubSpot limits API calls per account, so if other integrations already use a lot of your daily allowance, check your limit with HubSpot support before the initial backfill.
Steps 9 and 10: test, then turn it on
- Test. Click Test Mapping, which exports and deletes a test record with your settings. Fix any error, then click Save Changes.
- Turn it on, quietly. Back on the Connected tab of Admin Portal > Integrations > Connections, switch the toggle for HubSpot on. With a Service Account connection, that enables exporting for all users, so keep the export limit low and run a pilot before you announce it: export five companies you know and ten contacts at those companies, including one company that already exists in HubSpot. Raise the limit once the first week looks clean.
One behavior to know before reps start: ZoomInfo does not associate exported contacts with companies. Turn on HubSpot's Create and associate companies with contacts setting under Settings, Data Management, Objects, Companies, or exported contacts will float without a company.
How do you connect ZoomInfo Enrich?
Separately, from Admin Portal > Integrations > Connect Enrich. ZoomInfo's Enrich guide describes it as a feature for ZoomInfo Sales, and it has its own active admin, who needs full HubSpot admin rights and a ZoomInfo Admin Portal seat.
- In the Instant Enrich section, click Connect under the HubSpot tile, authenticate as the dedicated HubSpot user, review the scopes and click Connect app.
- Click Manage, choose Companies or Contacts, switch on Instant Enrich for that object, set the mapping and click Verify and Save.
- In the Scheduled Enrich section, connect the same way, then click New Job. Pick the object, name the job, set the frequency, and under Advanced Options set a credit limit per run and a minimum accuracy score.
- Scope each contact job to a HubSpot list rather than all contacts, and click Verify and Save.
ZoomInfo notes that Instant Enrich uses two HubSpot API calls per record. Which enrich mode fits which records is covered in ZoomInfo enrichment in HubSpot, and what it costs is in our ZoomInfo pricing guide.
How to confirm it worked
Check five things in HubSpot after your test exports:
| Check | Where | Pass when |
|---|---|---|
| Values landed in the right fields | Record > Actions > View property history | Each mapped field shows the ZoomInfo value and its change source |
| Owner is the exporting rep | Contact owner and Company owner | Not the primary connected admin |
| No duplicate for the record that already existed | Company search by domain | One record, updated |
| Contacts sit under their company | Contact record, Companies card | Associated automatically |
| App is healthy | HubSpot Settings > Integrations > Connected Apps | Nothing listed under Needs your attention |
If anything fails, our ZoomInfo HubSpot sync errors guide lists the usual causes and fixes. To track every phase from prep to the first 30 days, use the integration checklist.
Conclusion
Connecting ZoomInfo to HubSpot takes an afternoon if the decisions are made: a dedicated Super Admin service user, mapped users, conservative export settings, a tested field map and a small first export. Enrich is a second connection with its own admin and its own mapping, so set it up deliberately rather than by default.
Most of the problems we fix later trace back to skipped steps here, usually user mapping or company association. If you would like the setup and ongoing administration handled for you, our ZoomInfo as a Service team does this as part of running the platform.
Want your ZoomInfo connection set up right the first time?
We will review your HubSpot portal and ZoomInfo settings with you and tell you what to change before you go live. Book a free 30-minute fit check.
Frequently Asked Questions
Where do I connect ZoomInfo to HubSpot?
In ZoomInfo, go to Admin Portal, Integrations, Connections, find the HubSpot tile and click Connect. Enrich is connected separately under Admin Portal, Integrations, Connect Enrich.
Do I need to be a HubSpot Super Admin to connect ZoomInfo?
The HubSpot account used to make the connection must be a Super Admin or an admin with the permissions ZoomInfo lists. You also need ZoomInfo admin access to reach the Admin Portal.
Does the ZoomInfo HubSpot integration work with HubSpot Free?
ZoomInfo's integration guide lists HubSpot Free, Basic, Professional and Enterprise as supported plans. Some HubSpot features you will want alongside it, such as the duplicates tool, need Professional or higher.
What is the difference between a service account and user account connection?
With a service account, all exports run through one connected HubSpot user and reps never log in to HubSpot from ZoomInfo. With user accounts, each rep must connect their own HubSpot login before they can export.
Why are my exported records owned by the admin?
The rep's ZoomInfo user is not mapped to a HubSpot user, usually because the email addresses differ. Fix it with Edit User Mapping on the integration's General Settings page.
Does ZoomInfo associate exported contacts with companies in HubSpot?
No. ZoomInfo exports contacts as independent records. Turn on HubSpot's setting to automatically create and associate companies with contacts.
How long does it take to connect ZoomInfo to HubSpot?
In our experience the connection and configuration take a few hours when your data is clean and your mapping decisions are made. Data prep and testing usually take longer than the setup itself.
Sources & References
- ZoomInfo: HubSpot Integration Guide
- ZoomInfo: Enrich for HubSpot Integration Guide
- HubSpot App Marketplace: ZoomInfo Inbound Enrich
- HubSpot: Manage your connected apps
- HubSpot: Automatically create and associate companies with contacts
Related Reading from Quantum
- ZoomInfo HubSpot Integration Checklist: Before, During and After Go-Live
- ZoomInfo to HubSpot Field Mapping: A Template for Contacts and Companies
- ZoomInfo HubSpot Sync Errors: How to Find and Fix the Common Ones
- What Is a ZoomInfo Solutions Partner?
Ready to put any of this into practice? See how ZoomInfo as a Service works →
About the Author — Shawn Peterson
CEO · Quantum Business Solutions · HubSpot Platinum Solutions Partner
Shawn has spent 20+ years architecting revenue operations for B2B organizations across office equipment, MSP and IT services. Quantum is a HubSpot Platinum Solutions Partner and a ZoomInfo Diamond partner that builds HubSpot, runs outbound email and calling programs, and helps companies get found in search and AI answers. Connect on LinkedIn →
No call required
Stuck on a step connecting ZoomInfo to HubSpot?
Tell us which step you are on and what you see on screen, and we will reply with what to check next. If your setup looks right, we will say that.


